Electrolux EOB98000X User Manual download pdf (Page 14)

Activating the function:

1. Activate the appliance.

2. Set the heating function.

3.

Touch

again and again until the

display shows Duration .

4. Set the time.

5.

Touch

again and again until the

display shows SET+GO .

6. Touch OK to confirm.

To start SET+GO touch any sensor field

(except

). The set oven function starts.

When the oven function ends, an acoustic

signal sounds.

When the oven function operates, the

function Key Lock is on.

You can activate and deactivate the

SET+GO function in the Basic Settings

menu.

Heat+Hold

The Heat+Hold function keeps prepared

food warm at 80° for 30 minutes. It acti-

vates after the baking or roasting procedure

ends.

Conditions for the function:

• The set temperature is more than

80°C.

• The function duration is set.

Activating the function

1. Activate the appliance.

2. Select the oven function.

3. Set the temperature above 80°C.

4.

Touch

again and again until the

display shows Heat+Hold . Touch OK

to confirm.

When the function ends, an acoustic signal

sounds.

The Heat+Hold function operates for 30 mi-

nutes.

The Heat+Hold function stays on if you

change the oven functions.

You can activate or deactivate the

function in Basic Settings menu.

Key Lock

The Key Lock prevents an accidental

change of the oven function .

Activating the Key Lock

1. Activate the appliance.

2. Set the oven function.

3.

Touch

again and again until the

display shows Key Lock

4. Touch OK to confirm.

The Key Lock is active.

Deactivating the Key Lock

1.

Touch

.

2. Touch OK to confirm.

The Key Lock is not active.

If you deactivate the appliance, the Key

Lock deactivates.

Child Lock

The Child Lock prevents an accidental op-

eration of the appliance .

Activating the Child Lock

1. Deactivate the appliance.

2.

Touch

and — at the same time at

the same time until the display shows a

message.

Deactivating theChild Lock

1. Do the above steps again.

The automatic switch-off

If you do not change the temperature

or stop the oven after some time, the

oven stops automatically.

The last temperature set flashes in the

display.

The oven stops with the temperature

of:

• 30 - 120° C after 12.5 hours

• 120 - 200° C after 8.5 hours

• 200 - 230° C after 5.5 hours

Using the oven after an automatic

switch-off

Use

.

Heat-up indicator

When you activate an oven function, the

bar on the display comes on. The bar

shows that the temperature increases.

Rapid heat-up indicator

For some oven functions the rapid heat-up

function decreases the heat-up time auto-

matically. The bar of the indicator moves

from right to left until the oven reaches the

target temperature.

Residual heat indicator

When you deactivate the appliance, the dis-

play shows the residual heat. You can use

the heat to keep the food warm.

14 electrolux

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comments to this Manuals

No comments