Electrolux GA45SLV User Manual

GA45SLVEN Dishwasher User Manual

The washing results are the same aswith the normal programme duration. Thedrying results can decrease.How to activate TimeSaverPress . The related in

6.2 How to fill the rinse aiddispenserMAX1234+-ADCBCAUTION!Only use rinse aidspecifically designed fordishwashers.1. Press the release button (D) to o

Starting a programme1. Keep the appliance door ajar.2. Press the on/off button to activate theappliance. Make sure that theappliance is in programme s

8. HINTS AND TIPS8.1 GeneralFollow the hints below to ensure optimalcleaning and drying results in daily useand to help you protect the environment.•

8.5 Before starting aprogrammeBefore you start the selectedprogramme, make sure that:• The filters are clean and correctlyinstalled.• The cap of the s

5. Make sure that there are no residuesof food or soil in or around the edgeof the sump.6. Put back in place the flat filter (A).Make sure that it is

solve the problem by yourself with thehelp of the information in the table orcontact an Authorised Service Centre.WARNING!Repairs not properly donemay

Problem and alarm code Possible cause and solutionThe remaining time in thedisplay increases andskips nearly to the end ofprogram time.• This is not a

Problem Possible cause and solutionPoor drying results. • Tableware has been left for too long inside aclosed appliance.• There is no rinse aid or the

Problem Possible cause and solutionLimescale deposits on thetableware, on the tub and onthe inside of the door.• The level of salt is low, check the r

CONTENTS1. PRODUCT DESCRIPTION... 32. CONTROL PANEL...

12. CH GUARANTEECustomer Service CentresPoint of ServiceIndustriestrasse 105506 MägenwilLe Trési 61028 PréverengesVia Violino 116928 MannoMorgenstrass

ENGLISH 21

www.electrolux.com22

ENGLISH 23

www.electrolux.com/shop156914523-A-402018

1. PRODUCT DESCRIPTION4379 8 105611 121Upper spray arm2Lower spray arm3Filters4Rating plate5Salt container6Air vent7Rinse aid dispenser8Detergent disp

2. CONTROL PANEL1234567891On/off button2Display3Delay touchpad4Program touchpad5Hygiene touchpad6TimeSaver touchpad7XtraDry touchpad8Reset touchpad9In

Programme Degree of soilType of loadProgramme phases OptionsP4Pro• Heavy soil• Crockery, cut‐lery, pots andpans• Prewash• Wash 70 °C• Rinses• Dry• Hyg

Programme 1)Water(l)Energy(kWh)Duration(min)P6ExtraSilent9 - 11 0.9 - 1.1 220 - 230P7Gläser10 - 12 0.8 - 0.9 60 - 801) The pressure and the temperatur

Water hardnessGerman de‐grees (°dH)French de‐grees (°fH)mmol / l Clarke de‐greesWater softenerlevel47 - 50 84 - 90 8.4 - 9.0 58 - 63 1043 - 46 76 - 83

• The indicator still flashes.• The display shows the currentsetting: = the rinse aid emptynotification is activated (factorysetting).2. Press to c

How to deactivate AirDryMake sure the appliance is in user mode.1. Press .• The indicators , , and are off.• The indicator still flashes.• The