Electrolux EOB98000X User Manual download pdf (Page 9)

electrolux 9

Before using for the first time

3 If you would like to change one of these

base settings at a later date, please refer

to the Basic Settings section.

Setting the language

1. When the appliance has been connect-

ed to the electrical supply, the following

is shown in the display.

– the company logo

– the version of the software and the peri-

od of operation

– the message ”Set language”

2. Using or , select the desired lan-

guage.

3. Confirm selected language with .

From now on the texts in the display ap-

pear in the language set.

Setting contrast and brightness

3 After you have set the language, the

messages “Set contrast” and “Set

brightness” are displayed.

The contrast and the brightness are set

according to the language set (see sec-

tion “Setting language”)

Setting the clock

After you have set the contrast and the

brightness, the message ”Set Time of Day”

is displayed.

4. Using or set the hour of the current

time.

5. Confirm with .

6. Using or set the minutes of the cur-

rent time.

7. Confirm with .

The appliance is now ready to use.

3 The time only has to be set if the appli-

ance is disconnected from the power

supply for a long time.

Initial cleaning

Clean the oven before using it for the first

time.

1 Important: Do not use caustic or abra-

sive cleaning agents! These can dam-

age the oven surfaces.

3 For the metal surfaces, use commercial-

ly available cleaning agents.

1. Open the oven door.

The oven light is illuminated.

2. Remove all oven accessories, and clean

them with warm water and a scouring

agent.

3. Wash the oven in the same way, and

wipe dry.

4. Wipe the front of the appliance with a

damp cloth.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Comments to this Manuals

No comments