Electrolux EOB8851AAX User Manual download pdf (Page 23)

CARE AND CLEANING

WARNING!

Refer to "Safety information" chap-

ter.

Notes on cleaning:

• Clean the front of the appliance with a

soft cloth with warm water and a clean-

ing agent.

• To clean metal surfaces, use a usual

cleaning agent.

• Clean the appliance interior after each

use. Then you can remove dirt more

easily and it does not burn on.

• Clean stubborn dirt with a special oven

cleaner.

• Clean all accessories after each use and

let them dry. Use a soft cloth with warm

water and a cleaning agent.

• If you have nonstick accessories, do not

clean them using aggressive agents,

sharp-edged objects or a dishwasher. It

can cause damage to the nonstick coat-

ing.

STEAM CLEANING

1.

Remove the worst of the dirt manually.

2.

Put 250 ml of water with 3 table-

spoons of vinegar directly into the

steam generator.

3.

Activate the Steam Cleaning function in

the main menu. The display shows the

duration of the function.

4.

An acoustic signal sounds when the

programme is completed. Touch a

sensor field to deactivate the signal.

5.

Wipe out the appliance with a soft

cloth. Remove the remaining water

from the steam generator.

6.

Keep the appliance door open for ap-

proximately 1 hour. Wait until the appli-

ance is dry.

STEAM GENERATION SYSTEM

CAUTION!

Dry the steam generator after

each use. Remove the water with

the sponge.

Remove the limescale with water

and vinegar.

CAUTION!

Chemical de-scaling agents can

cause damage to the enamel. Fol-

low the instructions of the manu-

facturer.

Cleaning the water drawer and the

steam generator:

1.

Put the water and vinegar mixture (ap-

proximately 250 ml) through the wa-

ter drawer into the steam generator.

Wait for approximately 10 minutes.

2.

Remove the water and vinegar with the

sponge.

3.

Put clean water (100 - 200 ml) into the

water drawer to flush the steam gener-

ation system.

4.

Remove the water from the steam

generator with the sponge and rub it

dry.

5.

Keep the door open to let the appli-

ance dry fully.

SHELF SUPPORTS

You can remove the shelf supports to clean

the side walls.

Removing the shelf supports

2

3

1

1.

Carefully pull the supports up and out

of the front catch.

2.

Lightly move the supports on the front

catch inwards.

3.

Pull the supports out of the rear catch.

Installing the shelf supports

Install the shelf supports in the opposite se-

quence.

ENGLISH 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Comments to this Manuals

No comments