Electrolux EOB8851AAX User Manual download pdf (Page 24)

LAMP

WARNING!

There is a risk of electrical shock.

The lamp and the lamp glass cover

can be hot.

Before you change the lamp:

• Deactivate the appliance.

• Remove the fuses from the fuse box or

deactivate the circuit breaker.

CAUTION!

Put a cloth on the bottom of the in-

terior of the appliance. It prevents

damage to the lamp glass cover

and the cavity.

Always use the same lamp type.

Replacing the lamp at the cavity

ceiling:

1.

Turn the lamp glass cover counter-

clockwise to remove it.

2.

Remove the metal ring and clean the

glass cover.

3.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

4.

Attach the metal ring to the glass cov-

er.

5.

Install the glass cover.

Replacing the lamp on the left side of

the cavity:

1.

Remove the left shelf support.

2.

Use a Torx 20 screwdriver to remove

the cover.

3.

Remove and clean the metal frame

and the seal.

4.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

5.

Install the metal frame and the seal.

Tighten the screws.

6.

Install the left shelf support.

CLEANING THE OVEN DOOR

Removing the door and the glass panels

You can remove the oven door and the in-

ternal glass panels to clean it. The number

of glass panels is different for different

models.

WARNING!

Be careful when you remove the

door from the appliance. The door

is heavy.

A

A

1.

Open the door fully.

2.

Fully press the clamping levers (A) on

the two door hinges.

3.

Close the oven door to the first open-

ing position (approximately 70° angle).

4.

Hold the door with one hand on each

side and pull it away from the appli-

ance at an up angle.

5.

Put the door with the outer side down

on a soft cloth on a stable surface.

This is to prevent scratches.

24

www.electrolux.com

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Comments to this Manuals

No comments