Electrolux EVYP9841AX User Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
CAUTION!
Do not put water directly into the
steam generator!
Use only water as the liquid. Do
not use filtered (demineralised) or
distilled water.
3.
Activate the appliance.
4.
Set the steam heating function and
temperature.
5.
If necessary, set the function Duration
or End Time .
The first steam shows after approxi-
mately 2 minutes. An acoustic signal
sounds when the appliance is at ap-
proximately the set temperature.
The signal sounds again at the end of
the cooking time.
6.
Deactivate the appliance.
When the steam generator is
empty, an acoustic signal sounds.
When the appliance is cool, soak
up all remaining water from the
steam generator with the sponge.
If necessary, clean the steam gen-
erator with some vinegar.
Let the appliance dry fully with the
door open.
6.6 Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold
for 3 sec-
onds. The heat-up indicator alternates.
Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
6.7 Energy saving
The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:
Residual heat:
When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions ( Duration , End Time ).
When the appliance is off, you can
use the heat to keep food warm. The
display shows the remaining temper-
ature.
Cooking with the lamp off - touch
and hold
for 3 seconds to deactivate
the lamp during cooking.
7. CLOCK FUNCTIONS
Symbol Function Description
Minute Minder
To set a countdown (max. 2 h 30 min). This function
has no effect on the operation of the appliance. Use
to activate the function. Press or to set
the minutes and OK to start.
Duration
To set how long the appliance has to be in opera-
tion (max. 23 h 59 min).
End Time
To set the switch-off time for a heating function
(max. 23 h 59 min).
If you set the time for a clock function, the
time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90 % of the set time.
ENGLISH 13
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Comments to this Manuals

No comments