Electrolux EVYP9841AX User Manual download pdf (Page 4)

• Before maintenance cut the power supply.

• Do not use harsh abrasive cleaners or sharp metal

scrapers to clean the glass door since they can scratch

the surface, which may result in shattering of the glass.

• Only use the core temperature sensor recommended

for this appliance.

• To remove the shelf supports first pull the front of the

shelf support and then the rear end away from the side

walls. Install the shelf supports in the opposite se-

quence.

• If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

• Ensure that the appliance is switched off before replac-

ing the lamp to avoid the possibility of electric shock.

2.

SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must in-

stall this appliance.

• Remove all the packaging.

• Do not install or use a damaged appli-

ance.

• Obey the installation instruction sup-

plied with the appliance.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Do not pull the appliance by the handle.

• Keep the minimum distance from the

other appliances and units.

• Make sure that the appliance is installed

below and adjacent safe structures.

• The sides of the appliance must stay

adjacent to appliances or to units with

the same height.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical information

on the rating plate agrees with the pow-

er supply. If not, contact an electrician.

• Always use a correctly installed shock-

proof socket.

• Do not use multi-plug adapters and ex-

tension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.

Contact the Service or an electrician to

change a damaged mains cable.

• Do not let mains cables to come in

touch with the appliance door, specially

when the door is hot.

• The shock protection of live and insula-

ted parts must be fastened in such a

way that it cannot be removed without

tools.

4

www.electrolux.com

1 2 3 4 5 6 7 8 9 ... 47 48

Comments to this Manuals

No comments