Electrolux EWX147410W User Manual download pdf (Page 32)

The manufacturer does not accept

any responsibility for damage or

injury through failure to comply

with the above safety precaution.

Should the appliance power supply

cable need to be replaced, this

MUST be carried out by a Service

Centre.

The power supply cable must be

easily accessible after installing the

machine.

BUILDING IN

OVERVIEW

This appliance has been designed to be

built into the kitchen furniture. The recess

should have the dimensions shown in Fig.

1.

Fig. 1

600 mm

555 mm

596 mm

170 mm

75 mm

100 mm

60 mm

min.

820 mm

min.

560 mm

818 mm

When installing the appliance into the

kitchen furniture ensure, if possible, the

hoses are placed in either of the two

recesses on the back of the appliance.

This will help to prevent the hoses from

becoming kinked or trapped.

Preparation and assembly of the door

The appliance is originally prearranged for

the assembly of a door opening from right

to left (Fig. 2).

Fig. 2

a) Door

The dimensions of the door should be:

- width 595-598 mm

- thickness 16-22 mm

The height X depends on the height of the

adjacent furniture's base (Fig. 3).

Fig. 3

Ø 35 mm

14 mm

16-22 mm

22±1,5 mm

416

mm

X

595-598 mm

b) Hinges

To mount the hinges it is necessary to drill

two holes (dia. 35 mm, depth 12.5-14 mm

depending on the depth of door furniture)

on the inner side of the door. The distance

between the holes hobs fixing centres must

be 416 mm.

The distance from upper edge of the door

to the centre of the hole depends on the

adjacent furniture's dimensions.

The hinges will be fixed to the door by

means of screws for wood 1 and 2 (Fig. 4)

supplied with the appliance.

Fig. 4

1

2

c) Mounting the door

32 electrolux

1 2 ... 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments