Electrolux EWX147410W User Manual download pdf (Page 34)

9

Top view

Front edge

Position the base into the recess with its

front edge as far forward as the adjoining

plinth line will allow.

The reason for placing the base in this

position is to allow a small strip of

beading to be fitted in front of the ap-

pliance feet.

Fix the base firmly to the floor using four ap-

propriate countersunk screws (see Fig. 10).

10

600-605

490

5 x 25 x 605

Hardwood strip

5 mm x 25 mm

With the appliance installed adjust all four

feet ensuring the machine is stable, and a

clearance of approximately 5 mm is left be-

tween the top of the machine and the un-

derside of the worktop.

A final check for stability should be carried

out with the machine on spin with a load,

this will identify the need for any further fine

adjustment to the feet.

A strip of beading approximately 605 mm

W, x 5 mm H, x 25 mm D must be screwed

down into the base directly in front of the

machine’s feet, this will provide additional

security.

If required an additional door magnet, part

number 1242394-00/3 and disc, part num-

ber 1242393-00/5 are available from spare

parts.

ENVIRONMENT CONCERNS

The symbol on the product or on its

packaging indicates that this product may

not be treated as household waste. Instead

it should be taken to the appropriate

collection point for the recycling of electrical

and electronic equipment. By ensuring this

product is disposed of correctly, you will

help prevent potential negative

consequences for the environment and

human health, which could otherwise be

caused by inappropriate waste handling of

this product. For more detailed information

about recycling of this product, please

contact your local council, your household

waste disposal service or the shop where

you purchased the product.

PACKAGING MATERIALS

The materials marked with the symbol

are recyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

34 electrolux

1 2 ... 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments