Electrolux EI27BS16JW User Manual download pdf (Page 10)

Once both doors are in place, ensure they are aligned

with each other and level (please see the “Installation”

section for more details), and replace the top hinge

cover.

CAUTION

Be sure doors are set aside in a secure position

where they cannot fall and cause personal injury,

or damage to the doors or handles.

To remove the refrigerator doors:

1 Tracelightlyaroundthedoor’stophingeswitha

pencil. This makes reinstallation easier.

2 Disconnect the harness by grasping both sides of

the connector ﬁrmly, depress the latch, and pull

apart. Remove the two (2) screws from the top

hinge. Lift the door off of the bottom hinge and

set it aside.

Lower Hinge Removal

3 Unscrew the three (3) lower hinge screws and

hinge if necessary.

Removing the Doors

Getting through narrow spaces

If your refrigerator will not ﬁt through an entrance area,

you can remove the doors. Check ﬁrst by measuring the

entrance.

To prepare for removing the doors:

1 Make sure the electrical power cord is unplugged

from the wall outlet.

2 Open the freezer drawer and remove the toe

grille (see “Installation” section).

3 Remove any food from the door shelves and

close the doors.

Removing Freezer Drawer

1 Open freezer drawer.

2 Remove drawer screws on right and left sides

(two (2) screws on each side).

3 Lift drawer up and out to remove.

Remove Hex

Head Drawer

Screw

Remove Hex

Head Drawer

Screw

Do Not Remove

Other Screws

Remove Hex

Head Drawer

Screw

Remove Hex

Head Drawer

Screw

Do Not Remove

Other Screws

CAUTION

Drawer is heavy. Use caution when lifting.

To reinstall the right door, reverse the above steps.

1 ... 9 10 11 ... 32

Comments to this Manuals

No comments

Electrolux EI27BS16JW User Manual Page 10

Comments to this Manuals

Related products and manuals for Refrigerators Electrolux EI27BS16JW