Condensation dryerUser Information EDC 5470125984580-01-080306-01
10Prior to using for the first timeSwitching on the appliance for the first time - setting the languageThe display is set to German as standard in the
11Before the first drying cycleIn order to remove any residues which may havebeen produced during production, wipe the dryerdrum with a damp cloth or
12DryingSwitching machine on / switching light onTurn the programme selector to any programme orturn it to LIGHT (BELEUCHTUNG). The machine hasbeen sw
13Setting optionsOptions can be added to a drying cycle that has al-ready been selected.Press the OPTION button. The display shows thesymbols for the
14Half Power, Buzzer, Sensitive 1. Press the OPTION button repeatedly until the re-quired symbol flashes, e. g. & HALF POWER (eve-ry time you pres
15Delay Start Timer1. Press the TIME (ZEIT) button repeatedly until theT DELAY START symbol flashes.2. Press the OK button. In the display, “Start in
16Programme progress The display indicates the stage of the programmethat is currently being performed as well as the timeof the end of the programme.
17SetupThe special functions that can be set under Setup re-main permanently stored independent of each dryingcycle – even after the appliance has bee
18SoundThe volume of the acoustic audible signal can be se-lected.1. Turn the programme knob to any programme andpress the OPTION button repeatedly, u
19Clock1. Turn the programme knob to any programme andpress the OPTION button repeatedly, until theú SETUP symbol flashes. 2. Press the OK button.3. P
2Dear customer,Please read this user information carefully.In particular, pay attention to the section ”Safety” onthe first pages. Keep this user info
20Cleaning and maintenanceCleaning fluff filterTo ensure that the dryer works perfectly, the fluff fil-ters (micro-fine filter and fine strainer) must
21Clean the entire filter area3 The strainer area does not have to be cleanedafter every drying cycle, but should bechecked regularly and cleaned of f
22Emptying the condensed water containerEmpty condensed water container after every dryingcycle. When a programme is running and the condensedwater co
23Cleaning the heat exchang-erIf the display shows PLEASE CLEAN THE CON-DENSER, the heat exchanger must be cleaned.1 Caution! Operating when the heat
24Cleaning the drum1 Caution! Do not use abrasives or steel wool toclean the drum.3 Lime in the water or cleaning agents may forma barely visible lini
25 Changing bulb for inside lightOnly use a special bulb which is designed speciallyfor dryers. The special bulb is available from the af-ter-sales se
26Technical Data5This appliance complies with the following EUdirectives:– 73/23/EEC dated 19.02.1973 Low Voltage Direc-tive– 89/336/EEC dated 03.05.1
27Installation and connection instructions1 Installation safety instructions• Before first starting up, all parts of the transportsafety equipment mus
28Electrical connectionDetails on mains voltage, type of current and the fus-es required should be taken from the type plate. Thetype plate is fitted
297. Unscrew cover plates E from the front of the ma-chine, rotate through 180°, screw on the oppositeside. 8. Unscrew door lock F, push down slightly
3Contents Instructions for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30Servicestellen5506 Mägenwil/ZürichIndustriestr. 109000 St. GallenVonwilstrasse 154127 BirsfeldenHauptstrasse 528604 VolketswilHölzliwisenstrasse 126
31GaranziaPer ogni prodotto concediamo una garanzia di 2 annia partire dalla data di consegna o dalla sua messa infunzione (fa stato la data della fat
The Electrolux Group. The world´s No.1 choice.The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and out
4Installation and connection instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Installation safety
5Instructions for use1 Safety Before first starting up• Note the ”Installation and connection instruc-tions”• Before first starting up, check the mach
6Disposal2Packaging materialThe packaging materials are environmentallyfriendly and can be recycled. The plastic com-ponents are identified by marking
7Description of machine Control panel What is shown in the display Drawer containing condensate tankScrewed feet(with height adjustment)Loading door(i
8Programme overviewProgrammesmax. load(weight when dry)Additional functionsApplication/propertiesCare symbols& HALF POWER 1)1) & HALF POWER an
9 Programmesmax. load(weight when dry)Additional functionsApplication/propertiesCare symbols& HALF POWER 1)1) & HALF POWER and SENSITIVE cann
Comments to this Manuals