Electrolux ESF2210DW User Manual download pdf (Page 7)

6. BEFORE FIRST USE

1.

Make sure that the set level of the wa-

ter softener agrees with the water

hardness in your area. If not, adjust

the water softener. Contact your local

water authority to know the water

hardness in your area.

2. Fill the salt container.

3.

Fill the rinse aid dispenser.

4.

Open the water tap.

5.

Processing residues can stay in the

appliance. Start a programme to re-

move them. Do not use detergent and

do not load the baskets.

6.1 Adjusting the water softener

Water hardness

Elec-

tronic

adjust-

ment

German

degrees

(°dH)

French

degrees

(°fH)

mmol/l Clarke

degrees

> 24 > 40 > 4.2 > 29 10

22 - 24 39 - 40 3.9 - 4.2 27 - 29 9

20 - 22 35 - 39 3.5 - 3.9 25 - 27 8

18 - 20 32 - 35 3.2 - 3.5 23 - 25 7

16 - 18 28 - 32 2.8 - 3.2 20 - 23 6

13 - 16 23 - 28 2.3 - 2.8 17 - 20

5

1)

10 - 13 18 - 23 1.8 - 2.3 13 - 17 4

7 - 10 12 - 18 1.2 - 1.8 9 - 13 3

4 - 7 7 - 12 0.7 - 1.2 5 - 9 2

< 4 < 7 < 0.7 < 5

1

2)

1)

Factory position.

2)

Do not use salt at this level.

6.2 Electronic adjustment

1.

Press the on/off button to activate the

appliance.

2. If necessary, do the Reset function.

3. Press and hold Program until the pro-

gramme indicator

starts to

flash and the programme indicator

comes on with fixed light.

4.

Wait until the programme indicator

goes off and the end indicator

starts to flash. The programme indica-

tor

continues to flash.

5.

Press Program. The end indicator

starts to flash. The intermittent flashing

of the end indicator refers to the cur-

rent set level.

• E.g. 5 flashes + pause + 5 flashes =

level 5.

6.

Press Program again and again to

change the setting. Each time you

press Program the level number in-

creases.

7.

Press the on/off button to deactivate

the appliance and to confirm the set-

ting.

ENGLISH 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments