Electrolux ESF47005X User Manual download pdf (Page 6)

The digital display

The digital display indicates:

• the level of hardness to which the water

softener is set,

• the approximate remaining time of the run-

ning programme,

• activation/deactivation of the rinse aid dis-

penser ( ONLY with multitab function ac-

tive),

• the end of a washing programme (a zero

will appear in the digital display),

• the countdown for the delay start,

• fault codes concerning malfunction of the

dishwasher.

Cancel button

With this button you can cancel a washing

programme or a delay start in progress.

Programme selection buttons

Press one of these buttons until the pro-

gramme indicator light of the desired pro-

gramme comes on.

Multitab button

Set this function when you use combi deter-

gent tablets (3 in 1, 4 in 1, 5 in 1, etc.).

Refer to 'Multitab function' chapter.

Save energy button

This function decreases the temperature in

the drying phase. Energy saving is between

10% and 25%.

Dishes can be wet at the end of the pro-

gramme. In this condition we recom-

mend, to open the dishwasher door and

keep it ajar and let dishes dry naturally.

This function can be set with all washing pro-

grammes. The related indicator light comes

on when you press the button.

The save energy function has no effect on

some programmes. Refer to 'Washing pro-

grammes' for the list of programmes where

save energy has or not effect.

Delay start button

You can delay the start of the programme for

between 1 and 19 hours.

Refer to 'Select and start a washing pro-

gramme' chapter for the set of this function.

Function buttons (A, B and C)

The following functions can be set using

these buttons:

• adjustment of the water softener level,

• activation/deactivation of the rinse aid dis-

penser when multitab function is active.

Setting mode

The appliance must be in setting mode

when you:

– select a washing programme,

– adjust the water softener level,

– activate/deactivate the rinse aid dis-

penser.

Switch on the appliance.

– All programme indicator lights come on,

the appliance is in setting mode.

Switch on the appliance.

– Only one programme indicator light comes

on, the last selected programme is still set.

In this case, to go back to the setting

mode, you must cancel the programme.

– Simultaneously press and hold the cancel

button until all the programme indicator

lights come on. The programme has been

cancelled and the appliance is now in set-

ting mode.

First use

Before using your dishwasher for the first

time:

• Ensure that the electrical and water con-

nections comply with the installation in-

structions

• Remove all packaging from inside the ap-

pliance

• Set the water softener level

• Pour 1 litre of water into the salt container

and then fill with dishwasher salt

• Fill the rinse aid dispenser

If you want to use combi detergent

tablets such as: ''3 in 1'', ''4 in 1'', ''5

in 1'' etc... set the Multitab function.

(See ''Multitab function'').

6 electrolux

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments