ESF5512LOXEN Dishwasher User Manual
Water hardnessGerman de‐grees (°dH)French de‐grees (°fH)mmol/l Clarke de‐greesWater softenerlevel47 - 50 84 - 90 8.4 - 9.0 58 - 63 1043 - 46 76 - 83 7
– = rinse aid emptynotification activated.– = rinse aid emptynotification deactivated.2. Press Options to change the setting.3. Press on/off to conf
Activating options can affectthe water and energyconsumption as well as theprogramme duration.7.1 HygienePlusThis option provides better hygieneresult
4. Carefully shake the funnel by itshandle to get the last granules inside.5. Remove the salt around the openingof the salt container.6. Turn the cap
Make sure that the appliance is inprogramme selection mode.• If the salt indicator is on, fill thesalt container.• If the rinse aid indicator is on, f
Opening the door while theappliance operatesOpening the door while a programme isrunning stops the appliance. It may affectthe energy consumption and
• In areas with hard and very hardwater we recommend to use plaindishwasher detergent (powder, gel,tablets containing no additionalagents), rinse aid
11. CARE AND CLEANINGWARNING!Before maintenance,deactivate the appliance anddisconnect the mains plugfrom the main socket.Dirty filters and cloggedspr
CAUTION!An incorrect position of thefilters can cause badwashing results and damageto the appliance.11.2 Cleaning the spray armsDo not remove the spra
Problem and alarm code Possible cause and solutionThe program does notstart.• Make sure that the appliance door is closed.• Press Start.• If the delay
CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...
Problem and alarm code Possible cause and solutionThe appliance trips the cir‐cuit-beaker.• The amperage is insufficient to supply simultaneous‐ly all
Problem Possible cause and solutionThe dishes are wet. • For the best drying performance activate the optionXtraDry and set AirDry .• The programme do
Refer to "Before first use", "Daily use" or "Hints andtips" for other possiblecauses.13. TECHNICAL INFORMATIONDimensions
ENGLISH 23
www.electrolux.com/shop156931190-A-292018
1. SAFETY INFORMATIONBefore the installation and use of the appliance, carefullyread the supplied instructions. The manufacturer is notresponsible f
• The operating water pressure (minimum andmaximum) must be between 0.5 (0.05) / 8 (0.8) bar(MPa)• Obey the maximum number of 13 place settings.• If t
• Connect the mains plug to the mainssocket only at the end of theinstallation. Make sure that there isaccess to the mains plug after theinstallation.
3. PRODUCT DESCRIPTION54810 9 116712 2311Worktop2Upper spray arm3Lower spray arm4Filters5Rating plate6Salt container7Air vent8Rinse aid dispenser9Dete
4. CONTROL PANEL12 34 56781On/off button2Programs button3Programme indicators4Display5Delay button6Start button7Indicators8Options button4.1 Indicator
Programme Degree of soilType of loadProgramme phases Options 1)• Normal soil• Crockery andcutlery• Prewash• Wash 50 °C• Rinses• Dry• HygienePlus• Xtra
Programme 1)Water(l)Energy(kWh)Duration(min)13 - 14 0.9 - 1.1 70 - 854 0.1 141) The pressure and the temperature of the water, the variations of the m
Comments to this Manuals