Electrolux ESF6248 User Manual download pdf (Page 20)

Starting a dishwashing

cycle

1. Check that the spray arms can turn freely.

2. Turn the water tap on fully.

3. Close the door.

4. Press the ON/OFF button.

5. Select the desired cycle.

The programme indicator comes on. The remaining

time expected for the cycle will be shown in the

multi-display.

The selected cycle will begin after approximately 3

seconds.

3 During the dishwashing cycle, the remaining

time shown in the multi-display may be adjust-

ed according to the size of the load, degree of

soiling, etc.

Interrupting or aborting a dish-

washing cycle

Only interrupt a dishwashing cycle that is in progress

if it is absolutely necessary.

Interrupting the dishwashing pro-

gramme by opening the dishwasher door

1 Hot steam may escape when the door is

opened. There is a risk of scalding.

1. Open the door carefully. The dishwashing cycle will

stop.

2. Close the door. The cycle will continue.

Aborting the dishwashing cycle

1. Press function buttons 2 and 3 and keep them

pressed.

The programme display for the current cycle will

flash for several seconds and then go out.

2. Release the function buttons. The dishwashing cy-

cle has been cancelled.

3. If you want to start a new cycle, check whether

there is any detergent in the dispenser.

3 Turning off the dishwasher will only interrupt a

selected dishwashing cycle, not cancel it. The

cycle will recommence after turning the dish-

washer back on again.

Setting the Delay Timer

3 With the delay timer you can delay the start of

a dishwashing cycle for between 1 and 19

hours.

1.Press the Delay Timer button repeatedly until the

multi-display shows the desired time delay, for ex-

ample 12h, if the cycle is to start in 12 hours. The

Delay Timer indicator is illuminated.

2.Select dishwashing cycle.

3.The time remaining to the start of the cycle is con-

tinuously displayed (e. g. 12h, 11h, 10h, … 1h etc.).

To change the time delay:

As long as the cycle has not yet started, you can still

change the setting by pressing the DELAY TIMER

button.

Cancelling the time delay:

Press the Delay Timer button repeatedly until the

length of the selected cycle appears in the multi-dis-

play. The selected dishwashing cycle will begin im-

mediately.

To change a dishwashing cycle

As long as the cycle has not yet started, you can still

change the dishwashing cycle. First abort the dish-

washing cycle, then re-set the time delay, lastly se-

lect the new dishwashing cycle.

Switching off the dish-

washer

Do not switch off the dishwasher until the multi-dis-

play indicates “0” for the remaining cycle time.

1.Press the ON/OFF button. All display indicators will

go out.

2.Turn off the water tap.

1 Carefully open the door. Hot steam may es-

cape.

• Hot dishes are sensitive to knocks. Therefore leave

the dishes to cool for about 15 minutes before re-

moving them. You also get a better drying result.

• Dishes dry more quickly if you open the door for a

moment after the cycle has ended and then leave it

slightly open.

Removing the dishes

3 It is normal for the inner door and the dispens-

ers to be damp.

• Empty the lower basket first, then the upper bas-

ket. This way you avoid dripping water from the

upper basket onto dishes in the lower basket.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Comments to this Manuals

No comments

Electrolux ESF6248 User Manual Page 20

Comments to this Manuals

Related products and manuals for Dishwashers Electrolux ESF6248