Electrolux ESI User Manual download pdf (Page 11)

1)

Factory position.

2)

Do not use salt at this level.

You must adjust the water soften-

er manually and electronically.

Manual adjustment

Turn the water hardness dial to the posi-

tion 1 or 2.

Electronic adjustment

1.

Press the on/off button to activate the

appliance.

2. Press and hold, at the same time,

Program and TimeSaver for a few

seconds.

3. Press and hold, at the same time, De-

lay and Option until the indicators

, and start to flash.

4.

Press Program,

•

The indicators

and go off.

•

The indicator

continues to flash.

• The display shows the current set-

ting of the water softener. E.g.

= level 5.

5.

Press Program again and again to

change the setting.

6. Press the on/off button to deactivate

the appliance and to confirm the set-

ting.

6.2 Filling the salt container

1.

Turn the cap counterclockwise and

open the salt container.

2.

Put 1 litre of water in the salt contain-

er (only for the first time).

3.

Fill the salt container with dishwasher

salt.

4.

Remove the salt around the opening

of the salt container.

5.

Turn the cap clockwise to close the

salt container.

CAUTION!

Water and salt can come out from

the salt container when you fill it.

Risk of corrosion. To prevent it,

after you fill the salt container,

start a programme.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments