Electrolux ESI5550LOX User Manual

Browse online or download User Manual for Dishwashers Electrolux ESI5550LOX. Electrolux ESI5550LOX User Manual

  • Download
  • Add to my manuals
  • Print

Summary of Contents

Page 1 - ESI5550LOX

ESI5550LOXEN Dishwasher User Manual

Page 2 - CUSTOMER CARE AND SERVICE

Water hardnessGerman de‐grees (°dH)French de‐grees (°fH)mmol/l Clarke de‐greesWater softenerlevel47 - 50 84 - 90 8.4 - 9.0 58 - 63 1043 - 46 76 - 83 7

Page 3 - 1.2 General Safety

– = rinse aid emptynotification activated.– = rinse aid emptynotification deactivated.2. Press Option to change the setting.3. Press on/off to confi

Page 4 - 2. SAFETY INSTRUCTIONS

Activating options can affectthe water and energyconsumption as well as theprogramme duration.7.1 XtraDryActivate this option to boost the dryingperfo

Page 5 - 2.6 Disposal

It seems that the appliance is notworking. The washing phase starts onlyafter this procedure is completed. Theprocedure is repeated periodically.8.1 T

Page 6 - 3. PRODUCT DESCRIPTION

You can turn the selector ofthe released quantity (B)between position 1 (lowestquantity) and position 4 or 6(highest quantity).9. DAILY USE1. Open the

Page 7 - 5. PROGRAMMES

• The programme duration starts todecrease with steps of 1 minute.Starting a programme withdelay start1. Set a programme.2. Press Delay again and agai

Page 8 - 5.1 Consumption values

• Always use the whole space of thebaskets.• Make sure that items in the basketsdo not touch or cover each other.Only then can the water completelyrea

Page 9 - 6. SETTINGS

• The correct quantity of detergent isused.10.6 Unloading the baskets1. Let the tableware cool down beforeyou remove it from the appliance. Hotitems c

Page 10

7. Reassemble the filters (B) and (C).8. Put back the filter (B) in the flat filter(A). Turn it clockwise until it locks.CAUTION!An incorrect position

Page 11 - 7. OPTIONS

Problem and alarm code Possible cause and solutionYou cannot activate theappliance.• Make sure that the mains plug is connected to themains socket.• M

Page 12 - 8. BEFORE FIRST USE

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...

Page 13 - 8.2 How to fill the rinse aid

Problem and alarm code Possible cause and solutionThe appliance door is diffi‐cult to close.• The appliance is not levelled. Loosen or tighten theadju

Page 14 - 9. DAILY USE

Problem Possible cause and solutionThe dishes are wet. • For the best drying performance activate the optionXtraDry and set AirDry .• The programme do

Page 15 - 10. HINTS AND TIPS

Refer to "Before first use", "Daily use" or "Hints andtips" for other possiblecauses.13. TECHNICAL INFORMATIONDimensions

Page 16

ENGLISH 23

Page 17 - 11. CARE AND CLEANING

www.electrolux.com/shop156905834-A-102018

Page 18 - 12. TROUBLESHOOTING

1. SAFETY INFORMATIONBefore the installation and use of the appliance, carefullyread the supplied instructions. The manufacturer is notresponsible f

Page 19 - ENGLISH 19

• The operating water pressure (minimum andmaximum) must be between 0.5 (0.05) / 8 (0.8) bar(MPa)• Obey the maximum number of 13 place settings.• If t

Page 20

• Connect the mains plug to the mainssocket only at the end of theinstallation. Make sure that there isaccess to the mains plug after theinstallation.

Page 21 - ENGLISH 21

3. PRODUCT DESCRIPTION437 9 8 105611 121Upper spray arm2Lower spray arm3Filters4Rating plate5Salt container6Air vent7Rinse aid dispenser8Det

Page 22 - 14. ENVIRONMENTAL CONCERNS

4. CONTROL PANEL12 4683751On/off button2Program button3Programme indicators4Display5Delay button6Start button7Indicators8Option button4.1 IndicatorsIn

Page 23 - ENGLISH 23

Programme Degree of soilType of loadProgramme phases Options 1)• Normal soil• Crockery andcutlery• Prewash• Wash 50 °C• Rinses• Dry• TimeManager• Xtra

Page 24 - 156905834-A-102018

Programme 1)Water(l)Energy(kWh)Duration(min)13 - 14 0.9 - 1.1 70 - 854 0.1 141) The pressure and the temperature of the water, the variations of the m

Comments to this Manuals

No comments