Electrolux GA55IEEV User Manual download pdf (Page 44)

44 electrolux installation

Our appliances are supplied with a

security device to protect against the

return of dirty water back into the

machine.

If the spigot of your sink has a ‘no

return valve’ incorporated this can

prevent the correct draining of your

dishwasher. We therefore advise you

to remove it.

When connecting the drain hose to an

under sink trap spigot, the entire

plastic membrane (A) must be

removed. Failure to remove all the

membrane will result in food particles

building up over time eventually

blocking the dishwasher drain hose

spigot

Electrical connection

Safety standards require the

appliance to be earthed.

Prior to using the appliance for the

first time, ensure that the rated

voltage and type of supply on the

rating plate match that of the

supply where the appliance is to be

installed. The fuse rating is also to

be found on the rating plate.

Always plug the mains plug into a

correctly installed shockproof

socket.

Multi-way plugs, connectors and

extension cables must not be used.

This could constitute a fire hazard

through overheating.

If necessary, have the domestic

wiring system socket replaced. In

case that the electrical cable has to

be replaced, contact your local

Service Force centre.

The plug must be accessible after

the appliance has been installed.

Never unplug the appliance by

pulling on the cable. Always pull

the plug.

The manufacturer accepts no

liability for failure to observe the

above safety precautions.

117967 04/0en 17-04-2008 11:10 Pagina 44

1 2 ... 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments