Electrolux GA55SLISP User Manual Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
Problem and alarm code Possible cause and solution
The anti-flood device is on.
The display shows .
Close the water tap and contact an Authorised Serv‐
ice Centre.
The appliance stops and
starts more times during
operation.
It is normal. It provides optimal cleaning results and
energy savings.
The programme lasts too
long.
If the delay start option is set, cancel the delay set‐
ting or wait for the end of the countdown.
Activate the TimeSaver option to reduce the pro‐
gramme duration.
Activating options can increase the programme dura‐
tion.
The remaining time in the
display increases and
skips nearly to the end of
the programme duration.
This is not a defect. The appliance is working cor‐
rectly.
Small leak from the appli‐
ance door.
The appliance is not levelled. Loosen or tighten the
adjustable feet (if applicable).
The appliance door is not centred on the tub. Adjust
the rear foot (if applicable).
The appliance door is diffi‐
cult to close.
The appliance is not levelled. Loosen or tighten the
adjustable feet (if applicable).
Parts of the tableware are protruding from the bas‐
kets.
Rattling or knocking
sounds from the inside of
the appliance.
The tableware is not properly arranged in the bas‐
kets. Refer to basket loading leaflet.
Make sure that the spray arms can rotate freely.
The appliance trips the cir‐
cuit-beaker.
The amperage is insufficient to supply simultaneous‐
ly all the appliances in use. Check the socket amper‐
age and the capacity of the meter or turn off one of
the appliances in use.
Internal electrical fault of the appliance. Contact an
Authorised Service Centre.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
www.electrolux.com20
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

Comments to this Manuals

No comments