Electrolux GA60GXI203 User Manual download pdf (Page 39)

Serial number (S.N.) ....................

The washing results and drying results are not satisfactory

Problem Possible cause Possible solution

The dishes are not clean. The selected washing pro-

gramme was not applicable for

the type of load and soil.

Make sure that the washing pro-

gramme is applicable for the

type of load and soil.

The baskets were not loaded

correctly, water did not touch all

surfaces.

Load the baskets correctly.

The spray arms could not turn

freely because of incorrect ar-

rangement of the load.

Make sure that an incorrect ar-

rangement of the load does not

cause a blockage of the spray

arms.

The filters are dirty or not as-

sembled and installed correctly.

Make sure that the filters are

clean and correctly assembled

and installed.

The quantity of detergent was

not sufficient or missing.

Make sure that the quantity of

detergent is sufficient.

Limescale particles on the

dishes.

The salt container is empty. Fill the salt container with dish-

washer salt.

Incorrect water softener adjust-

ment

Adjust the water softener.

The salt container cap is not

closed correctly.

Make sure that the salt container

cap is closed correctly.

There are streaks, milky stains,

or a bluish layer on glasses and

dishes.

Rinse aid dosage is too high. Decrease the rinse aid dosage.

Dry water drop stains on glasses

and dishes.

Rinse aid dosage is too low. Increase the rinse aid dosage.

The detergent can be the cause. Use a different brand of deter-

gent.

The dishes are wet. You have set a washing pro-

gramme without drying phase or

with a decreased drying phase.

Let the door stay ajar for some

minutes before you remove the

dishes.

The dishes are wet and dull. The rinse aid dispenser is emp-

ty.

Fill the rinse aid dispenser with

rinse aid.

The multitab function is on. (The

rinse aid dispenser is automati-

cally off).

Activate the rinse aid dispenser.

Refer to 'How to activate the

rinse aid dispenser'.

How to activate the rinse aid dispenser

1. Switch on the appliance.

2. Make sure that the appliance is in setting

mode.

3. Press and hold function buttons B and C.

– The indicator lights for function buttons

A, B, and C start to flash.

4. Release function buttons B and C.

5. Press function button B.

– The indicator lights for function buttons

A and C go off.

– The indicator light for function button B

continues to flash.

– The display shows the current set.

Rinse aid dispenser de-

activated

Rinse aid dispenser ac-

tivated

electrolux 39

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments

Electrolux GA60GXI203 User Manual Page 39

Comments to this Manuals

Related products and manuals for Dishwashers Electrolux GA60GXI203