Electrolux TT4451 User Manual download pdf (Page 15)

Problem and alarm code Possible solution

The programme does not start. • Make sure that the appliance door is closed.

• The appliance has started the procedure to

recharge the resin inside the water softener.

The duration of the procedure is approxi‐

mately 5 minutes.

The appliance does not fill with wa‐

ter.

• The end indicator flashes 1 time

intermittently.

• Acoustic signal sounds 1 time in‐

termittently.

• Make sure that the water tap is open.

• Make sure that the pressure of the water

supply is not too low. For this information,

contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is

not clogged.

• Make sure that the inlet hose has no kinks

or bends.

The appliance does not drain the

water.

• The end indicator flashes 2 times

intermittently.

• Acoustic signal sounds 2 times

intermittently.

• Make sure that the sink spigot is not clog‐

ged.

• Make sure that the drain hose has no kinks

or bends.

The anti-flood device is on.

• The end indicator flashes 3 times

intermittently.

• Acoustic signal sounds 3 times

intermittently.

• Close the water tap and contact an Author‐

ised Service Centre.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.

For alarm codes not described in the

table, contact an Authorised Service

Centre.

11.1 The washing and drying results are not satisfactory

Problem Possible solution

There are whitish streaks or

bluish layers on glasses and

dishes.

• The release quantity of rinse aid is too much. Ad‐

just the rinse aid selector to a lower position.

• The quantity of detergent is too much.

There are stains and dry wa‐

ter drops on glasses and

dishes.

• The released quantity of rinse aid is not sufficient.

Adjust the rinse aid selector to a higher position.

• The quality of the rinse aid can be the cause.

The dishes are wet. • The programme does not have a drying phase or

has a drying phase with low temperature.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the cause.

Refer to "Hints and tips" for

other possible causes.

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comments to this Manuals

No comments

Electrolux TT4451 User Manual Page 15

Comments to this Manuals

Related products and manuals for Dishwashers Electrolux TT4451