8490 DCooker hoodOperating and Installation Instructions
10Guarantee conditionsGuarantee ConditionsAEG offer the following guarantee to the first purchaser of this appliance.1. The guarantee is valid for 12
11Technical dataModel 8490 DSize Height 820-1370 mmWidth 898 mmDepth 480 mmLight Max 2X20 WGrease filter 3 pcs.Voltage 220-240 VTotal power 175 WFuse
12InstallationUnpackingCheck that the cooker hood is not damaged. Transportation damagesshould immediately be reported to the transport company. Damag
13Mounting the cooker hood - Fig. 7Position the template on the wall and mark the position, and drill the holes (2x Ø 8 mm).Mount the two rawl plugs w
14Fig. 71212
15Fig. 8Power outletExhaust tubeElectric hob 500 mmGas hob 650 mmCharcoal and oil 700 mmWall bracketElectric hob
AEG Hausgeräte GmbHPostfach 1036D-90327 Nürnberghttp://www.aeg.hausgeraete.de© Copyright by AEGLI1IAE
2ContentsSafety instructions ... 2Description of the cooker hood ...
3Description of the cooker hoodAccessoriesThe following are included with the cooker hood.● 1 Adaptor 150-125 mm● 2 Tube clamps● 1 hood canopy complet
4The control panelUsing the cooker hoodT1: Main switch on/off (Activating and deactivating the stand-by mode)T2: Sensor switch enable/disableT3: Lamps
5Delayed switch off● The delayed switch off can be activated with knob T6 while the motor isrunning● The display shows remaining minutes until the mot
6Maintenance and cleaningBefore doing any maintenance work on the hood, disconnect itfrom the main supply by disconnecting the plug from the wallsocke
7Changing the lightDisconnect the cooker hood from the main supply before changing the light.To change the light (Fig. 5):● Press (1) the lamp cover (
8What to do ifIf your appliance fails to work properly please carry out the following checks.Symptom SolutionThe cooker hood will not start... The hoo
9Service and spare partsIn the event of your apppliance requiring service, or if you wish to purchasespare parts, contact your local AEG Service Force
Comments to this Manuals