Electrolux EOB53004X User Manual download pdf (Page 10)

6. Turn 2 fasteners by 90° and remove them

from their seats.

7. Carefully lift and remove the panel of

glass.

Clean the glass panel with water and soap.

Dry it carefully.

Warning! Only clean the glass panel

with water and a soap. Abrasive

cleaning agents, stain removers and

sharp objects (e.g. knives or scrapers)

can cause damage to the glass.

Inserting the door and the glass panel

When the cleaning procedure is completed,

insert the glass panel and the oven door. To

do so, do the steps in reverse.

The decorated internal panel marked with a

decorative frame must be assembled with

the screen-printing outside of the oven. The

panel of glass is assembled correctly if you

do not feel any roughness when you pass

your fingers over the surface.

Insert the internal panel of glass into the right

seats as on the picture.

Models in stainless steel or aluminium

Clean the oven door and control panel in

stainless steel or aluminium only with a moist

sponge. After that dry it carefully with a soft

cloth. Do not use steel wool, acids or clean-

ing agents as they can damage the surface.

Removable shelf runners and catalytic

panels

To clean the oven cavity remove the shelf

runners and catalytic panels.

Warning! Be careful when you remove

the shelf runners. The catalytic panels

are not attached to the oven cavity and

can fall out when you remove the shelf

runners.

Warning! Before maintenance, make

sure that the appliance is cool. There is

risk of burns because of residual heat.

Removing the side rails

1. Use one hand to pull the front part of the

shelf runners. Hold the shelf runners and

catalytic panel in place with the other

hand.

10 electrolux

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments