Electrolux EU8216C User Manual download pdf (Page 15)

Electrolux 8181499--02/4

Door Reversal

1. Close the cabinet and disconnect the appliance

from the electricity socket.

2. Remove the ventilation grille. There is a part on

the grille that can be removed. Reposition it and

transfer to the opposite side.

3. Support the cabinet on a wooden block when it is

laid down. This will make it easier to grip under the

cabinet when resupporting to an upright position.

4. On the upper part of t he cabinet. Remove the

hinge pin and replace on the other side.

5. On the lower part of the cabinet.

a Unscrew the hinge.

b Remove the door-closing fittings from the hinge

and put the hinge pin on the other side. Then attach

the supplied door-closing fitting.

6 a. R emove the door-closing fitting from the bottom

of the door.

b. R emove the plastic plug from the corresponding

hole on the other side. Use a screwdriver to rock the

plug loose. Then secure the supplied door-closing

fitting.

c. Secure the l ower hinge.

7. Raise the cabinet and replace the ventilation grille.

8. Unscrew the handle. Carefully press in the plastic

plugs on the opposite side using a punch. Secure the

handle in the plug holes. Then press the supplied

plastic plugs into the holes to which the handle was

previously fitted.

9. Put the cabinet in position. Check that it stands

straight. See the section "Positioning the cabinet".

1 2 ... 10 11 12 13 14 15 16

No comments

Electrolux EU8216C User Manual Page 15