Electrolux EUU1170 User Manual

INSTRUCTION MANUALKÄYTTÖOHJEBRUKSANVISNINGРУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ2222 736-33EUU 1170freezer / pakastin / frysskåp / морозильникGBFINSRUS

lf this appliance featuring magnetic door seals isto replace an older appliance having a spring lock(latch) on the door or lid, be sure to make thatsp

Door reversalThe appliance must be unplugged before startingwork. To reverse the opening direction of the door,proceed as follows:1. Remove the top hi

Fasten the appliance to the worktop or the sides,applying the sealing strip between the appliance andadjacent cabinet using the fixing brackets (E).Th

13tS.I.007S.I.008580a = 100b = 15025 - 80A = 820B = 87025PR168PR167/1DBShould adjustment of the furniture door be necessary,use the clearance of slots

Electrolux HemProdukter ABS-105 45 Stockholmwww.electrolux.seELECTROLUX HOME PRODUCTS OPERATIONS EUROPE

2CONTENTSInstructions for the userImportant Safety Instructions 3Description of the appliance 4Use 5Cleaning the interior 5Control panel 5Starting up

IMPORTANT SAFETYINSTRUCTIONSGeneral Safety This appliance is designed to be operated byadults. Children should not be allowed to tamperwith the contro

Attention: keep ventilation openings clear ofobstruction. If the appliance is transported horizontally, it ispossible that the oil contained in the co

USEStarting upInsert the plug into the wall socket. The appliance canbe activated/deactivated by pressing the ON/OFFbutton ➅.The pilot light ➄will lig

6Warning lightThis light ➃ warns when the temperature inside theappliance has increased so much as to jeopardize thepreservation of food in the compar

TIPSTips for freezing fresh foodsTo help you get the best out of the freezing process,here are a few hints: Freeze only good-quality, fresh and well-

8Unplug the appliance before carrying outany maintenance operation.WarningThis appliance contains hydrocarbons in itscooling unit maintenance and rech

SOMETHING NOT WORKING9tIf the appliance is not functioning properly, check that:If your appliance is still not working properly after making the above