21
Door reversal
Unplug the appliance before all operations.
To reverse the door, proceed as follows:
dismantle the lower hinge (3), pin (1), the threaded in-
sert (4) and the foot (2);
slide the door out from pin (5), unscrew the pin and
reposition on the opposite side;
unscrew the left front foot and reposition on the oppo-
site side;
unscrew the two screws which mask the holes for fix-
ing the hinge from the left front side;
reassemble the door;
reassemble the lower hinge (turning it 180
°
), the
threaded insert, the pin and the screw on the opposite
side, as shown in the figure;
Take off the handle cover (see Fig. 4), dismantle the
handle (6) and reassemble it on the opposite side.
Fig. 3
Attention
After completion of the door reversibility operation,
verify that the door gasket is adherent to the cabinet.
If the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or accel-
erate this process by heating up the part involved with
a normal hairdrier.
Fig. 4
the internal spring (Fig. 5) and withdraw it from its seat
and refit it on the opposite side.
bracket (1), pushing it into place.
Fig. 5
position until it is properly closed.
Comments to this Manuals