Electrolux ERN1401AOW User Manual download pdf (Page 9)

Problem Possible cause Solution

The appliance has no

power. There is no voltage

in the mains socket.

Connect a different electri-

cal appliance to the mains

socket.

Contact a qualified electri-

cian.

The lamp does not

work.

The lamp is in stand-by. Close and open the door.

The lamp is defective. Refer to "Replacing the

lamp".

The compressor op-

erates continually.

The temperature is not set

correctly.

Set a higher temperature.

The door is not closed

correctly.

Refer to "Closing the door".

The door has been

opened too frequently.

Do not keep the door open

longer than necessary.

The product temperature

is too high.

Let the product tempera-

ture decrease to room tem-

perature before storage.

The room temperature is

too high.

Decrease the room temper-

ature.

Water flows on the

rear plate of the re-

frigerator.

During the automatic de-

frosting process, frost de-

frosts on the rear plate.

This is correct.

Water flows into the

refrigerator.

The water outlet is clog-

ged.

Clean the water outlet.

Products prevent that wa-

ter flows into the water

collector.

Make sure that products do

not touch the rear plate.

Water flows on the

ground.

The melting water outlet

does not flow in the evap-

orative tray above the

compressor.

Attach the melting water

outlet to the evaporative

tray.

The temperature in

the appliance is too

low.

The temperature regulator

is not set correctly.

Set a higher temperature.

The temperature in

the appliance is too

high.

The temperature regulator

is not set correctly.

Set a lower temperature.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments