Electrolux RH303L User Manual download pdf (Page 6)

Connecting the Device to the Electricity Supply

 The device must be connected to a properly earthed socket in line

with the relevant valid country regulations.

 Check prior to initial operation that the voltage noted on the model label

corresponds to the mains voltage.

If this is not the case, do not connect the device and contact your dealer!

Changing the Doorhang

1. Remove the lower hinge pin.

2. Take off the door by moving it upwards.

3. Unscrew the upper hinge pin and mount it on the opposite side hinge.

4. Fit the door on the upper hinge pin and mount the lower hinge pin.

5. Check that the door closes properly and seals all round.

6. If the door handle is mount, fix the door handle of the opposide side

Changing the Decor Panel

The door panel can easily be mounted or changed. The dimensions of the panel

must be:

Hight 724,0 mm

Width 492,5 mm

Thicknes max. 3,2 mm

1. Remove the door, see Changing the Doorhang.

2. Unscrew the door strip and then withdraw the panel by sliding it downwards.

3. Fit the new panel in place and slide it up as far as possible.

4. Fit the door strip back in place.

Mount the Door Handle

4.5

4.4

4.6

4.7

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Electrolux RH303L User Manual Page 6