Electrolux U20012 User Manual download pdf (Page 17)

Press in the joint covers between the appliance and

the kitchen furniture.

Apply covers (B) on joint cover lugs and hinge holes.

Position the runners (H) at the top and bottom of the

inside of the kitchen unit as shown in the figure and

mark the position of the external holes.

After preparing the holes, screw the runners to the

kitchen unit door using 3,5x16 mm screws.

Open both the appliance door and that of the kitchen

unit to approx. 90°.

Place the little plates over the runners. Hold the

doors of the appliance and the unit together and

mark the holes.

Remove the little plates and make the holes with a

diam. of 2 mm. Replace the little plates over the

runners and screw in the screws provided (3,5x16

mm). For the alignement of the kitchen unit door, if

necessary, use the clearance size of the slotted

holes. At the end of the procedure, check that the

doors of the appliance and the kitchen unit open

properly.

PR35

8mm

PR34

D094

20mm

1 2 ... 12 13 14 15 16 17

No comments

Electrolux U20012 User Manual Page 17