Electrolux EGT6343LOK User Manual download pdf (Page 6)

thermocouple to warm up. If not, the

gas supply will be interrupted.

3.

Adjust the flame after it is regular.

If after some tries the burner does

not light, check if the crown and its

cap are in correct positions.

A

B

C

A)

Burner cap and crown

B)

Thermocouple

C)

Ignition candle

C

D

B

A

A)

Burner cap

B)

Burner crown

C)

Ignition candle

D)

Thermocouple

WARNING!

Do not keep the control knob

pushed for more than 15 seconds.

If the burner does not light after 15

seconds, release the control knob,

turn it into off position and try to

light the burner again after mini-

mum 1 minute.

In the absence of electricity you

can ignite the burner without elec-

trical device; in this case approach

the burner with a flame, push the

relevant knob down and turn it

counter-clockwise to maximum

gas release position.

If the burner accidentally goes out,

turn the control knob to the off po-

sition and try to light the burner

again after minimum 1 minute.

The spark generator can start auto-

matically when you switch on the

mains, after installation or a power

cut. It is normal.

3.2 Turning the burner off

To put the flame out, turn the knob to the

symbol

.

WARNING!

Always turn the flame down or

switch it off before you remove the

pans from the burner.

6

www.electrolux.com

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments