Gas hob - Ankastre ocakMod. EHG 6763 XINSTRINSTRINSTRINSTRINSTRUCTION BOOKLETUCTION BOOKLETUCTION BOOKLETUCTION BOOKLETUCTION BOOKLETKULLANMA KULLANMA
10Injectors replacement• Remove the pan supports.• Remove the burner's caps and crowns.• With a socket spanner 7 unscrew and remove theinjectors
11This hob can be inserted in a built-in kitchen unit whosedepth is between 550 and 600 mm. The hob dimensionsare shown in the relevant diagram.The ed
12Fitting the hob to the worktopThe hobs can be installed in a kitchen unit with anopening for insertion whose dimensions are shown inFig. 9. To insta
13a) Removable panelb) Space possibly useful forconnectionsFig. 12Fig. 13Fig. 15Fig. 16FO 1013FO 0947FO 0198Kitchen unit with doorProper arrangements
14This appliance, before leaving the factory, has beentested and studied by many experts and specialists, inorder to give you the best results.Any rep
08/07
3About Installation, Cleaningand Maintenance• It is mandatory that all operations required for theinstallation are carried out by a qualified or compe
4ContentsThis appliance complies with the followingE.E.C. Directives:- 2006/95 (Low Voltage Directive);- 89/336 (Electromagnetical Compatibility Direc
5Burner minimum maximumdiameter diameterLarge (rapid) 180 mm 260 mmMedium (semirapid) 120 mm 220 mmSmall (auxiliary) 80 mm 160 mmUsing the hob correct
6Cleaning and MaintenanceDisconnect the appliance from the electricalsupply, before carrying out any cleaning ormaintenance work.General cleaningWash
7 The following instructions about installation andmaintenance must be carried out by qualifiedpersonnel in compliance with the regulation inforc
8FO 0067Fig. 4Choose fixed connections or use a flexible pipe instainless steel in compliance with the regulation in force.If using flexible metallic
9The following instructions about installationmust be carried out by qualified personnel incompliance with the regulation in force.The appliance is de
Comments to this Manuals