Electrolux EHH6240IOK User Manual download pdf (Page 12)

Problem Possible cause Remedy

comes on

There is an error in the

appliance, because a

cookware boils dry. The

protection against be-

come too hot for the

cooking zone operates.

The Automatic Switch Off

operates.

Deactivate the appliance.

Remove the hot cook-

ware. After, approximate-

ly 30 seconds activate

the cooking zone again.

should go out of the

display, residual heat indi-

cator can stay. Let the

cookware become suffi-

ciently cool and check it

with the section Cook-

ware for the induction

cooking zone.

If you tried the above solutions and can-

not repair the problem, speak to your

dealer or the customer service. Give the

data from the rating plate, three digit letter

code for the glass ceramic (it is in the cor-

ner of the glass surface) and an error

message that comes on.

Make sure, you operated the appliance

correctly. If not the servicing by a custom-

er service technician or dealer will not be

free of charge, also during the warranty

period. The instructions about the cus-

tomer service and conditions of guarantee

are in the guarantee booklet.

8. INSTALLATION

WARNING!

Refer to the Safety chapters.

Before the installation

Before the installation of the appliance, re-

cord the information below from the rating

plate. The rating plate is on the bottom of

the appliance casing.

• Model ...........................

• PNC .............................

• Serial number ....................

8.1 Built-in appliances

• Only use the built-in appliances after

you assemble the appliance into correct

built-in units and work surfaces that

align to the standards.

8.2 Connection cable

• The appliance is supplied with the con-

nection cable.

• Replace the damaged mains cable with

a special cable (type H05BB-F Tmax

90°C; or higher). Speak to your local

Service Centre.

12

www.electrolux.com

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments