Electrolux EOCP5803AX User Manual download pdf (Page 19)

activate it only when the appliance

operates.

1. Activate the appliance.

2. Set a heating function or setting.

3. Press again and again until the

display shows: Function Lock.

4. Press to confirm.

If the Pyrolysis function

operates, the door is locked

and the symbol of a key

comes on in the display.

To deactivate the function, press . The

display shows a message. Press again

and then to confirm.

When you deactivate the

appliance, the function also

deactivates.

10.4 Set + Go

The function lets you set a heating

function (or a programme) and use it later

with one press of a sensor field.

1. Activate the appliance.

2. Set a heating function.

3. Press again and again until the

display shows: Duration.

4. Set the time.

5. Press

again and again until the

display shows: Set + Go.

6. Press

to confirm.

Press a sensor field (except for

) to start

the function: Set + Go. The set heating

function starts.

When the heating function ends, an

acoustic signal sounds.

• Function Lock is on when

the heating function

operates.

• The menu: Basic Settings

lets you activate and

deactivate the function:

Set + Go.

10.5 Automatic Switch-off

For safety reasons the appliance

deactivates automatically after some time

if a heating function operates and you do

not change any settings.

Temperature (°C) Switch-off time

(h)

30 - 115 12.5

120 - 195 8.5

200 - 245 5.5

250 - maximum 1.5

The Automatic switch-off

does not work with the

functions: Light, core

temperature sensor, End

Time, Duration.

10.6 Brightness of the display

There are two modes of display

brightness:

• Night brightness - when the appliance

is deactivated, the brightness of the

display is lower between 10 PM and 6

AM.

• Day brightness:

– when the appliance is activated.

– if you touch a sensor field during

the night brightness (apart from

ON / OFF), the display goes back

to the day brightness mode for the

next 10 seconds.

– if the appliance is deactivated and

you set the function: Minute

Minder. When the function ends,

the display goes back to the night

brightness.

10.7 Cooling fan

When the appliance operates, the cooling

fan activates automatically to keep the

surfaces of the appliance cool. If you

deactivate the appliance, the cooling fan

can continue to operate until the appliance

cools down.

ENGLISH

19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Comments to this Manuals

No comments