Electrolux EOC5741AOX User Manual download pdf (Page 34)

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a dish-

washer. It can cause damage to the

nonstick coating.

12.1 Pyrolytic cleaning

1.

Remove all accessories and remova-

ble shelf supports.

Do not start the pyrolytic

cleaning if:

– You did not remove the core

temperature sensor plug from

the socket. In some models, the

display shows "C2" when this

error occurs.

– You did not fully close the oven

door. In some models, the dis-

play shows "C3" when this error

occurs.

2.

Remove the worst dirt manually.

3.

Touch again and again until the

display shows “Pyro” and the number

of the cleaning programme.

4.

Touch or to set the duration

of the cleaning procedure:

– 1 – 1:00 for a low degree of dirt

– 2 – 1:30 for a usual degree of dirt

– 3 – 2:30 for a high degree of dirt.

Touch

to activate the Pyrolytic

cleaning function.

Useful information:

You can use the End function to delay the

start of the cleaning procedure.

During the pyrolytic cleaning the door is

locked. The symbol

and the bars of the

heat indicator come up, until the door un-

locks.

The door unlocks when the temperature

inside the oven is under safety conditions

and the Pyrolytic cleaning finishes.

During pyrolytic cleaning the lamp is de-

activated.

Cleaning reminder

To remind you that the pyrolytic cleaning

is necessary the cleaning reminder sym-

bol

flashes in the display after each

deactivation of the appliance for the next

10 seconds.

The cleaning reminder goes

out:

• After the end of the Pyrolytic

cleaning function

• When you deactivate it in the

basic settings (refer to "Settings

menu")

12.2 Shelf supports

Removing the shelf supports

You can remove the shelf supports to

clean the side walls.

1.

Pull the front of the shelf support

away from the side wall.

34

www.electrolux.com

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comments to this Manuals

No comments