Electrolux EXD25DN3W User Manual download pdf (Page 5)

3. After a few days when the Relative Hu-

midity has declined, press the HUMIDI-

TY

or buttons to choose a value

between 35% to 85%, so the room is

kept at a comfortable humidity. Press-

ing the

or buttons will change

the humidity selection in 5% incre-

ments. After you have set the desired

humidity, the readout will display the

actual room humidity. If at any time you

want to return to the CONTINUOUS

Mode, pressing the HUMIDITY

but-

ton will lower the Relative Humidity

through the 5% increments until the

display reads CO.

4. You can also use the FAN SPEED but-

ton

to change the fan speed to

HIGH or LOW. The indicator light will

show the setting you have selected. A

higher fan speed will result in quicker

moisture removal.

5. The CLEAN FILTER light will illuminate

after 250 hours of operation. At this

time refer to the care and cleaning sec-

tion to remove and clean the filter.

Once the filter has been cleaned and

replaced, simply press the FILTER but-

ton

to extinguish the light.

6. The TIMER function enables you to ei-

ther Delay Start or Delay Stop the unit

in the choice from 0.5 hour to 24

hours. If the unit is running, then select-

ing Timer will turn the unit off in the

hours that will be set (Delay Stop). If the

unit is off, then selecting Timer will turn

the unit on in the hours that will be set

(Delay Start).

TIMER setting:

First press TIMER button

, then ad-

just timer setting, by tapping or holding

the

or button to change the de-

lay timer at 0.5 hour increments, up to

10 hours, then by 1 hour increments up

to 24 hours. The control will count

down the time remaining (8, 7.5, 7,

etc.) until the unit either starts or stops.

For the Delay Start, the fan speed and

humidity maintained will be the same as

previous setting. After TIMER setting

finishes, pressing TIMER button

again at any time will stop the TIMER

function. The Delay Start/Stop Feature

will work until the unit either starts or

stops. Once that happens the above

steps have to be repeated.

– Before entering TIMER setting, make

sure power is being supplied to the

unit.

– Before entering TIMER setting, make

sure pressing HUMIDITY

or

button sets one desired room humid-

ity first.

7. To shut the unit down, press the ON/

OFF button

.

electrolux 5

1 2 3 4 5 6 7 8 9 10 ... 71 72

Comments to this Manuals

No comments