Electrolux EDE421E User Manual download pdf (Page 5)

17

ENGLISH

USE

Control panel

1 Programme Chart

This will help you to select the correct

programme for drying.

The programme Chart into English is supplied

with the Instruction booklet.

2 Door opening Button

Press this button to open the door.

3 ON/OFF Button

Press this button to switch the machine on. At

the end of the programme press it again to

switch the machine off.

4 Mains-On Light

This lights up when the machine is switched on.

(ON/OFF button pressed) and goes out by

depressing ON/OFF button again.

5 Low Temperature Button

Press this button to reduce the temperature

when drying particularly delicate items. The

corresponding light illuminates.

6 Buzzer OFF Button

The buzzer will sound during the “anti- crease”

phase. Press this button to switch the buzzer off.

The corresponding light lights on.

7 START Button

Press this button for 2 seconds to start the

selected drying programme.

If the door is opened during the programme,

this button has to be depressed after closing

the door to re-start the programme.

8 Control lights

Light

This light indicates that the machine is

performing the drying phase.

Light

This light indicates that the cooling phase is in

operation (10 min.).

If the light or flashes, this means that

the START button has to be depressed again to

re-start the programme.

Light

This light flashes at the end of the anti-crease

phase.

Light

The lights and flash alternately at the

end of the programme (after the cooling phase)

and during the anti-crease phase to remind you

that the programme has finished and the

laundry can be removed.

If only the light flashes this means that the

anti-crease phase has finished: the machine

stops functioning.

9 Programme Selector Dial

The selector dial allows you to select an

electronic drying programme (programmes A-H)

or a time controlled programme (programmes I-

L, 60 or 30 min.) to finish off drying. All you have

to do is set the selector dial to the programme

required.

To cancel a programme already started, turn the

programme selector dial to “O”.

At the end of drying turn the dial to “O” before

opening the door.

12345678 9

EDE 421 E

1 2 3 4 5 6 7 8 9 10 ... 13 14

Comments to this Manuals

No comments