Electrolux EDH6370 User Manual download pdf (Page 12)

Setting time delay

3 With the DELAY TIMER (ZEITVORWAHL) but-

ton, you can delay the start of a programme by

between 30 minutes (30' and a maximum of

23 hours (23h).

1. Select the programme

2. Press the DELAY TIMER (ZEITVORWAHL) button

as many times as necessary until the required start

delay appears on the multi display, e.g. 12h if the

programme is to be started in 12 hours. The DE-

LAY TIMER (ZEITVORWAHL) display is illuminated.

3 If 23h is displayed and you press the button

again, the time delay will be cancelled. The

display will show 0' and then the duration of

the selected programme.

3. To activate the delay timer, press the START/

PAUSE button. The amount of time remaining until

the programme is set to start is continuously dis-

played (e.g. 12h, 11h, 10h, … 30

' etc).

3 Until the start of the programme the drum is

moved at longish intervals to loosen the laun-

dry.

Starting the programme

Press the START/PAUSE button. The programme is

started.

The programme progress display and the display

showing the level of dryness show drying progress.

Changing programme

To change a programme which has been selected by

mistake once the programme has started, first turn

the programme selector to OFF (AUS) and then reset

the programme.

3 The programme can no longer be changed di-

rectly once the programme has started. If nev-

ertheless there is an attempt to change the

programme on the programme knob, the pro-

gramme progress display and the mainte-

nance indicators flash. If an option button

(excluding the AUDIBLE SIGNAL (SIGNAL)

button) is pressed, Err appears in the multi-

display. The drying programme is not however

affected by this (laundry protection).

Putting in extra items or

taking items out before end

of programme

1.Open door.

1 Warning! Laundry and drum can become hot

Risk of bums!

2.Load or remove laundry items.

3.Close door securely.

4.Press the START/PAUSE button to continue the

drying cycle.

Drying cycle complete / re-

moving laundry

Once the drying cycle is complete, the END (ENDE)

and CREASE GUARD (KNITTERSCHUTZ) displays

light up. If the AUDIBLE SIGNAL (SIGNAL) button

has been pressed, an audible signal sounds intermit-

tently.

3 The drying cycles (except for the WOOL pro-

gramme) are automatically followed by a

crease guard phase which lasts around 30

minutes. The drum rotates in intervals during

this phase. The laundry thereby remains re-

laxed and free of creases. The laundry can be

removed at any time during the crease guard

phase. (The laundry should be taken out to-

wards the end of the crease guard phase at

the latest to prevent creases from forming.)

If LONG ANTICREASE (KNITTERSCHUTZ +)

has been selected, the anti-crease phase is

lengthened by 60 minutes.

1.Open loading door

2.Before removing the laundry, remove lint from the

micro-fine filter. It is best to use a damp hand for

this purpose (refer to “Cleaning and maintenance”

section).

3.Remove laundry.

4.Turn the programme selector to OFF (AUS).

Important! After each drying cycle

– clean the micro-fine filter and fine strainer,

– drain the condensate tank

(refer to the “Cleaning and maintenance” section).

5.Close loading door.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comments to this Manuals

No comments

Electrolux EDH6370 User Manual Page 12

Comments to this Manuals

Related products and manuals for Tumble dryers Electrolux EDH6370