Electrolux EOB5434AOX User Manual download pdf (Page 24)

90°

7. First lift carefully and then remove

the glass panel.

1

2

8. Clean the glass panel with water and

soap. Dry the glass panel carefully.

When the cleaning is completed, install

the glass panel and the oven door. Do

the above steps in the opposite

sequence.

The screen-printing zone must face the

inner side of the door. Make sure that

after the installation the surface of the

glass panel frame on the screen-printing

zones is not rough when you touch it.

Make sure that you install the internal

glass panel in the seats correctly.

10.8 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

CAUTION!

Always hold the halogen

lamp with a cloth to prevent

grease residue from burning

on the lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300

°C heat-resistant lamp.

4. Install the glass cover.

www.electrolux.com24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments