Electrolux EOC5651BOX User Manual download pdf (Page 11)

or flashes in the display.

2. Press or to the set the values

and press to confirm.

For Duration first you set the minutes

and then the hours, for End first you

set the hours and then the minutes.

An acoustic signal sounds for 2 minutes

after the time ends. or symbol and

time setting flash in the display. The oven

stops.

3. Turn the knob for the oven functions

to the off position.

4. Press any button or open the oven

door to stop the acoustic signal.

If you press when you set

the hours for DURATION ,

the appliance goes to setting

of the END function.

6.3 Setting the MINUTE MINDER

1. Press .

and "00" flash in the display.

2. Press or to set the MINUTE

MINDER.

First you set the seconds, then the

minutes and then the hours.

At first, the time is calculated in

minutes and seconds. When the time

you set is longer than 60 minutes, the

symbol comes on in the display.

The appliance now calculates the time in

hours and minutes.

3. The MINUTE MINDER starts

automatically after five seconds.

After 90% of the set time, an acoustic

signal sounds.

4. When the set time ends, an acoustic

signal sounds for two minutes.

"00:00" and flash in the display.

Press any button or open the oven

door to stop the acoustic signal.

If you set the MINUTE

MINDER when the

DURATION or END function

operates, the symbol

comes on in the display.

6.4 Count Up Timer

Use the Count Up Timer to monitor how

long the oven operates. It is on

immediately when the oven starts to heat.

To reset the Count Up Timer, press and

hold and . The timer starts to count

up again.

The Count Up Timer cannot

be used with the functions:

Duration , End , core

temperature sensor.

7. USING THE ACCESSORIES

WARNING!

Refer to Safety chapters.

7.1 Using the core temperature

sensor

The core temperature sensor measures

the core temperature of the meat. When

the meat is at the set temperature, the

appliance deactivates.

There are two temperatures to be set:

• The oven temperature. Refer to the

table for roasting.

• The core temperature. Refer to the

table for the core temperature sensor.

CAUTION!

Only use the core

temperature sensor supplied

with the appliance, or

genuine replacement parts.

1. Set the oven function and the oven

temperature.

2. Put the point of the core temperature

sensor (with the symbol on the

handle) into the centre of the meat.

3. Put the plug of the core temperature

sensor into the socket on the top of

ENGLISH

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comments to this Manuals

No comments