Electrolux EUC3003 User Manual download pdf (Page 13)

Electrolux 818 21 37-02/9

Door Reversal

1. Close the cabinet and remove the plug from the

electrical socket.

2. Remove the ventilation grille. There is a part on

the grille that can be removed. Remove and

reposition it on the opposite side.

3. Support the appliance on a wooden block when it

is laid down. This will make it easier to grip under

the appliance when returning to an upright position.

4. On the upper part of the appliance. R emove the

hinge pin and replace on the other side.

5. On the lower part of the appliance.

a. Unscrew the hinge.

b. Remove the door-closing fittings from t he hinge

and put the hinge pin on the other side. Then attach

the supplied door-closing fitting.

6. a. Remove the door-closing fitting from the

bottom of t he door.

b. Then secure the supplied door-closing fitting on

the other side.

c. Secure the lower hinge.

Remove any play in the door by adjusting the height

of the lower hinge with the supplied spanner. Secure

with the lock-nut.

7. Raise the appliance and replace the ventilation

grille.

8. To transfer the handle.

Unscrew the screws. Push the blanking plugs into

the holes on the opposite side of the door. Fit the

handle onto the opposite side by turning it one half

circle. Press the supplied plastic plugs into the holes

to which t he handle was previously fitted.

9. Put the appliance in position. Check that the

appliance is level. See the section "Positioning the

appliance".

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Electrolux EUC3003 User Manual Page 13