Electrolux IH24E User Manual download pdf (Page 11)

Installation versions

For fittings directly on the appliance, the bushing openings pre-embossed in

the appliance hood must be cut out for the extension pipes of the fitting. The

supporting sheet (1) enclosed with the fitting fixes the extension pipes in

position and seals the housing openings. To ensure moisture protection,

the supporting sheet must be fitted.

Fitting must be vertically seated and centrally

under the appliance. Seal appliance

connection to the wall, where necessary, with

G 1/2 A blind plugs (2) (fitting accessory).

If a cold water supply is made to the

appliance, the shutoff adapter (3) should be

replaced by an adapter with a wood screw

(4) for fixing the fitting in place.

Important! After completion of the water installation, the appliance

should be thoroughly flushed with cold water (open the hot water valve).

The strainer insert may possibly need cleaning afterwards.

The following tapping fittings are suitable:

D 169 - Special mixer tap with swivelling outlet

D 159 - Special shower mixer tap

D 149 - Special bath mixer tap with change-over tub/shower

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

No comments

Electrolux IH24E User Manual Page 11