Electrolux EWN 14991 W User Manual download pdf (Page 43)

installation electrolux 43

The drain hose may be extended to a

maximum of 4 metres.

An additional drain hose and joining

piece is available from your local

Service Force Centre. The joining piece

must have an internal diameter of 18

mm.

If your drain hose looks like this (see

below) you do not require the «U»

piece. Just push the hose firmly into

the standpipe.

2. Onto a sink outlet spigot.

If the outlet spigot has not been used

before, remove any blanking plug that

may be in place.

P1197

P1212

Min. 60 cm (23.6)

Max. 90 cm (35.4)

3 pin

HEC0012

Push the drain hose onto the spigot

and secure with a clip if required,

ensure a loop is formed in the drain

hose (see diagram) to prevent waste

from the sink entering the washing

machine.

Important!

Before connecting the machine to new

pipework or to pipework that has not

been used for some time, run off a

reasonable amount of water to flush

out any debris that may have collected

in the pipes.

Special conditions

If the floor is carpeted or covered with

crumbly or soft material, insert a rigid

support base under the feet to prevent

noise, vibration or displacement. The

base should protrude a few

centimetres beyond the edges of the

machine.

Warning !

The machine should NOT be placed on

deep pile carpeting.

P1198

Loop

132972250 EN.qxd 13/04/2007 14.14 Pagina 43

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

Comments to this Manuals

No comments