Electrolux EW1232I User Manual download pdf (Page 13)

7 Anti-crease button

When this button is pressed, the last rinse water is

not emptied out, to prevent the fabrics from creasing.

When the programme has finished, the pilot light of

the START/PAUSE button flashes to indicate that

the water must be emptied out.

To empty out water there are 3 possibilities:

• Select programme (draining):

The water is emptied out without spinning.

Attention! Before selecting programme the

selector dial has to be positioned on X (cancelling).

• Depress START/PAUSE button : after

emptying, the machine performs the spin cycle

corresponding to the type of fabric previously

selected.

• Select the spin speed by means of the relevant

button and then depress the START/PAUSE

button.

The machine empties itself after 18 hours.

8 Extra rinse button

Can be used with all programmes except the wool

programme. The machine performs 4 rinses instead

of 3.

This option is recommended for people who are

allergic to detergents and in areas where the water is

very soft.

9 START/PAUSE button

This button has three functions:

Start - Pause - Draining of water / Spin.

After having selected the required programme, press

this button to start the machine; the corresponding

pilot light stops flashing.

To interrupt a programme which is running, depress

the Start/Pause button: the corresponding pilot light

starts to flash.

To restart the programme from the point at which it

was interrupted, press the START/PAUSE button

again.

Pause

Start

By depressing the Start/Pause button

• The water of programme (Soak) is emptied out

• The water of the last rinse on programmes with

Anti-crease option is emptied out and the

laundry is spun.

10 Programme progress display

By selecting the wash programme, the pilot lights

corresponding to the various phases making up the

programme come on.

After the machine has started, only the running

phase pilot light stays on. When the programme has

finished, the End pilot light comes on.

The END pilot light flashes in the event of

operating problems.

At the same time one of the following lights starts to

flash:

= the machine does not fill

= the machine does not empty

= the door has not been closed

To eliminate the problem, see paragraph “Something

not working”.

If the pilot light flashes at the end of the

programme this means that the drain filter must be

cleaned.

The door light indicates if the door can be

opened:

• Light on: the machine is functioning, but the door

cannot be opened (see page 39).

• Light off: the door can be opened (at the end of

the cycle) or cannot be opened because the

machine is functioning.

• Light blinking: the machine is in PAUSE and the

door cannot be opened.

Draining of water/spin

132999650•EW1232I•e-gb 20-12-2000 16:23 Pagina 38

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Comments to this Manuals

No comments

Electrolux EW1232I User Manual Page 13

Comments to this Manuals

Related products and manuals for Washing machines Electrolux EW1232I