Electrolux EWF 10470 W User Manual Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service
Centre, please carry out the checks listed below.
During machine operation it is possible that the red Start/Pause pilot light flashes
and one of the following alarm codes appears on the display to indicate that the
machine is not working:
E10: problem with the water supply
E20: problem with water draining
E40: door open.
Once the problem has been eliminated, press the Start/Pause button to restart the
programme. If after all checks, the problem persists, contact your local Service
Centre.
Malfunction Possible cause Solution
The washing machine does
not start:
The door has not been
closed. E40.
The plug is not properly
inserted in the power
socket.
There is no power at the
socket.
The main fuse has blown.
The selector dial is not
correctly positioned and the
Start/Pause button has not
been depressed.
The delay start has been
selected.
Close firmly the door.
Insert the plug into the
power socket.
Please check your domestic
electrical installation.
Replace the fuse.
Please turn the selector dial
and press the Start/Pause
button again.
If the laundry are to be
washed immediately, cancel
the delay start.
The machine does not fill: The water tap is closed.
E10
The inlet hose is squashed
or kinked. E10
The filter in the inlet hose is
blocked. E10
The door is not properly
closed. E40
Open the water tap.
Check the inlet hose
connection.
Clean the water inlet hose
filter.
Close firmly the door.
something not working electrolux 29
132979220.qxd 30/08/2006 12:04 Pagina 29
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 43 44

Comments to this Manuals

No comments