Electrolux EWF12853 User Manual download pdf (Page 12)

12 www.electrolux.com

Time Manager ( )

Select this option to add approximately

30 minutes of tumbling in vapour during

the wash cycle. Vapour helps open fabric

fibers up to allow laundry additives to

release tough stains. The indicator of this

option comes on.

Vapour Touchpad ( )

Vapour may not necessarily be visible

inside the drum during a vapour wash

cycle. Vapour is created below the

drum and allowed to naturally rise into

the clothes.

At the end of the Vapour cycle the

clothes will be warmer, softer and

detached from the drum.

If Vapour option is selected, rinse

temperatures will be elevated.

During a vapour cycle you may

notice vapour exiting from the drain

hose of the washing machine, this

is normal and there is no cause for

alarm.

Vapour may not be present during the

entire vapour wash cycle.

Vapour function is more effective with

half load.

NOTE:

●

●

●

●

3.6 Settings

Child Safety Lock Option ( )

Your appliance is provided with CHILD

SAFETY LOCK which permits you to

leave the appliance unsupervised with

the door closed without having to worry

that children might be injured by or cause

damage to the appliance.

Set this option after pressing the

Start/Pause touchpad.

To activate the function, press

“Rinse + ( ) and Easy Iron ( )”

touchpads at the same time until the

display shows the symbol “ ”.

To set “Child Lock” option:

To deactivate the function, press

“Rinse + ( ) and Easy Iron ( )”

touchpads at the same time until the

symbol “ ” goes off.

This function remains enabled

even after the appliance is

switched off.

●

●

When selecting this option the laundry is

gently washed and spun to avoid

creasing. In this way ironing is easier.

The indicator of this option comes on.

Easy Iron Touchpad ( )

After selecting Delay End time, press

Start/Pause touchpad to start the

program. Machine will then countdown

and update time on the display every

hours until it reaches the starting point of

the wash cycle.

3.20 hrs.2.40 hrs.

Working Cycle

“Delay End” Time : 6 hrs.

Pressed

Start/Pause

End of

Cycle

Start the

Program

Countdown

If you wish to modify or cancel Delay End

option after starting the program, follow

the steps below:

set the washing machine to PAUSE by

pressing “Start/Pause” touchpad;

-

deselect this option by pressing “Delay

End” touchpad repeatedly till the

display shows delay time “ ”;

-

press the “Start/Pause” to start the

program.

-

Prewash Touchpad ( )

Select this option if you wish your laundry

to be pre-washed before the main wash.

Use this option for heavy soil. The

indicator of this option comes on.

When you set this function, put the

detergent into the “ ” compartment.

This function increases the program

duration.

This option allows you to adjust the wash

time. Press this touchpad repeatedly to

decrease or increase the wash time

according to the soil level of your wash.

Use the table below as a guide.

Soil Level

Light Medium Normal Heavy

Wash Level

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments