Electrolux EWF1286GDW User Manual download pdf (Page 17)

After approximately 15

minutes from the start of the

programme:

• The appliance adjusts

automatically the

programme duration

agree with the laundry

load.

• The display shows the

new value.

10.8 Starting a programme with

the delay start

1. Press again and again until the

display shows the delay you want to

set.

The related indicator comes on the

display.

2. Press :

• The appliance starts the

countdown.

• The door locks, the display shows

the indicator .

If the indicator flashes, the

door is locking. If the display

shows an alarm message after

the indicator

has flashed for a

few seconds, it indicates that the

door is not properly locked (for

more details see Troubleshooting

chapter).

• When the countdown is

completed, the programme starts

automatically.

You can cancel or change

the set of the delay start

before you press the . To

cancel the delay start:

• Press to set the

appliance to pause.

• Press until the

display shows

'.

• Press again to

start the programme

immediately.

10.9 Interrupting a programme

and changing the options

You can change only some options

before they operate.

1. Press

.

The indicator flashes.

2. Change the options.

3. Press again.

The programme continues.

10.10 Cancelling a running

programme

1. Press the button for some

seconds to cancel the programme

and to deactivate the appliance.

2. Press the same button again to

activate the appliance. Now, you can

set a new washing programme.

Before starting the new

programme the appliance

could drain the water. In this

case, make sure that the

detergent is still in the

detergent compartment, if

not fill the detergent again.

10.11 Opening the door

CAUTION!

If the temperature and level

of the water in the drum are

too high and the drum still

rotates, you cannot open the

door.

While a programme or the delay start

operates, the appliance door is locked

and the display shows the indicator .

Open the appliance door when the

programme or the delay start

operates:

1. Press to pause the appliance.

2. Wait until the door lock indicator

goes off.

3. Open the door.

4. Close the door and press again .

The programme or delay start continues

to operate.

ENGLISH 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comments to this Manuals

No comments