Electrolux EWF1481 User Manual download pdf (Page 38)

Important! Do not position the inlet hose

vertically downwards. Position it to the

right or the left as shown in the illustra-

tion.

2. Connect the hose with the straight con-

nector to a water tap with an R ¾ (inch)

screw thread.

3. To tighten or loosen the threaded hose

fitting, only the metal nuts must be

turned. When doing this, keep a firm

hold on the housing of the safety valve

with one hand, so that it does not turn

at the same time.

Important! To tighten or loosen the

threaded hose fitting, never turn the

housing of the safety valve, as other-

wise the inner hose will be damaged.

4. Open the water tap slowly and check all

connections for water tightness.

Water drainage

The maximum permitted difference between the height of the surface on

which the appliance is installed and the water outlet is 1 metre.

Only original hoses may be used to extend hoses. (A maximum of 3 m laid

on the floor and then 80 cm vertically). The Customer Care Department

stocks outlet hoses of different lengths.

Draining water into a sink outlet

Secure the outlet/sink outlet joint with a

hose band clip (available from your deal-

er).

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

No comments

Electrolux EWF1481 User Manual Page 38