Electrolux EWF1486ODW User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
Rinse Hold
Set this option to prevent the laundry
creases.
The washing programme stops with the
water in the drum. The drum turns reg-
ularly to prevent the laundry creases.
The door stays locked. You must drain
the water to unlock the door.
The display shows the indicator
.
To drain the water refer to ‘At the
end of the programme’.
Extra Silent
Set this option to remove all spin pha-
ses and to perform a silent washing.
The rinse phase uses more water for
some washing programmes.
The washing programme stops with the
water in the drum. The drum turns reg-
ularly to prevent the laundry creases.
The door stays locked. You must drain
the water to unlock the door.
The display shows the indicator
.
To drain the water refer to ‘At the
end of the programme’.
7.3 Prewash
With this option you can add a prewash
phase to a washing programme.
Use this option for heavy soil.
When you set this option the programme
duration increases.
The related indicator comes on.
7.4 Delay Start
With this option you can delay the start of
a programme from 30 minutes to 20
hours.
The display shows the related indicator.
7.5 Extra Rinse
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to de-
tergents and in areas where the water is
soft.
The related indicator comes on.
7.6 Hot and cold
Two inlet hoses are supplied with the ap-
pliance : one for the cold water and one
for the hot water.
Turn the knob clockwise and set one of
the first 3 washing programmes, the rela-
ted indicator comes on.
The hot water connection is on.
The appliance fills with hot water from
your domestic hydraulic system.
To wash with cold water only, press
to
deactivate the hot water connection. the
related indicator goes off.
The cold water is warmed up by the heat-
ing element of the appliance.
7.7 Time Manager
When you set a washing programme, the
display shows the default duration.
Press
or to decrease or increase the
programme duration.
The Time Manager is available only with
the programmes in the table.
Indicator
1)
2)
2)
2)
3)
2)
2)
1)
Shortest: to fresh the laundry.
2)
Programme default duration.
3)
Longest: Increasing the programme
duration gradually decreases the energy
consumption. The optimized heating
phase saves energy and the longer
ENGLISH 11
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments