EWS 0864 EDW... ...EN WASHING MACHINE USER MANUAL
7.3 Prewash With this option you can add a prewashphase to a washing programme.Use this option for heavy soil.When you set this option the programmedu
8. BEFORE FIRST USE1.Put 2 litre of water in the detergentcompartment for washing phase. Thisactivates the drain system.2.Put a small quantity of dete
Liquid or powder detergent1.A2.123.B4.• Position A for powder detergent (factory setting).• Position B for liquid detergent.When you use the liquid de
If you set something incorrect, thedisplay shows the message Err.9.5 Starting a programmewithout delay startPress :•The indicator stops to flash an
•The door lock indicator goes off.• Remove the laundry from the appliance.Make sure that the drum is empty.• Keep the door ajar, to prevent the mil-d
10.3 Detergents and additives• Only use detergents and additives spe-cially made for washing machines.• Do not mix different types of deter-gents.• To
11.4 Door sealRegularly examine the seal and remove allobjects from the inner part.11.5 Cleaning the detergent dispenser1.122.3. 4.11.6 Cleaning the d
1. 2.2113. 4.215.126.7. 8.21ENGLISH 17
9. 11.7 Cleaning the inlet hose and the valve filter1.1232.3. 4.45°20°11.8 Emergency drainBecause of a malfunction, the appliancecannot drain the wat
1.Disconnect the mains plug from themains socket.2.Close the water tap.3.Remove the water inlet hose.4.Put the two ends of the inlet hose in acontaine
CONTENTS1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. SAFETY INSTRU
Problem Possible solutionThe appliance doesnot drain the water.Make sure that the sink spigot is not clogged. Make sure that the drain hose has no ki
Problem Possible solution Decrease the laundry load.After the check, activate the appliance.The programme continues from the pointof interruption.If
22www.electrolux.com
ENGLISH 23
www.electrolux.com/shop132918330-A-362012
1. SAFETY INFORMATIONBefore the installation and use of the appliance, carefullyread the supplied instructions. The manufacturer is notresponsible if
2. SAFETY INSTRUCTIONS2.1 Installation• Remove all the packaging and thetransit bolts.• Keep the transit bolts. When you movethe appliance again you
• Before maintenance, deactivate the ap-pliance and disconnect the mains plugfrom the mains socket.• Do not use water spray and steam toclean the appl
4. CONTROL PANELTimeManagerарутарепмеТмижтОCтарта ПаузаакчорстОатратсЛегкаяглажкапоДполосканиевдерПакритсШëлкХлопок EcoХлопокШторыПолосканиеОдеялаДжин
5. PROGRAMMESProgrammeTemperature rangeType of load and soilMaximum load, Maximum spin Хлопок90° C - ColdWhite cotton and coloured cotton (normal soil
1) «Хлопок Eco » at 60°C with a load of 6 kg is the reference programme for the data enteredin the energy label, in compliance with EEC 92/75 standard
Programmes Load(Kg)Energyconsump-tion(kWh)Water con-sumption(litre)Programmeduration(minutes)Хлопок Eco 60 °C1)of the pro-grammes,please referto the d
Comments to this Manuals