Electrolux EWW14012 User Manual download pdf (Page 15)

ENGLISH 15

To prevent the formation of

creases or shrinking of

fabrics, avoid excessive

drying.

WARNING!

Should the laundry still be too

wet at the end of the program,

set another short drying cycle.

The final part of a washer-

dryer cycle occurs without

heat (cool down cycle). This

ensures the laundry will be

left at a low temperature.

3.20

Additional drying

3.21

Buzzer Sounds

The program is completed.

The appliance has a malfunction.

The buzzer sounds operate when:

If you want to disable the buzzer

sound (except for event of

appliance malfunction),

press

“Dryness” and “Vapour” touchpads

at the same time for 3 seconds,

and listen for ‘BEEP, BEEP’.

To return to default configuration

press these 2 touchpads at the

same time for 3 seconds, and listen

for ‘BEEP’.

The message “Set dosage

detergent” comes on in the text bar.

Press repeatedly to set the

detergent dosage to maximum

manufacturer recommendation on

the packaging which is the 100%

equivalent.

For the maximum detergent quantity

see the detergent manufacturer

recommendation on packaging.

Press to confirm.

BEFORE FIRST USE4.

Ensure that the electrical and water

connections comply with the

installation instructions.

Put 2 litres of water in the detergent

compartment for washing phase.

This activates the drain system.

1.

2.

3.

Select a Cottons cycle at 90 °C,

without any laundry in the machine,

to remove any manufacturing residue

from the drum and tub. Pour 1/2 a

measure of detergent into the

dispenser drawer and start the

machine.

The text bar also gives the indication

about the detergent quantity, when

the door is closed after the laundry

load.

You can set the indication as ml to

have more precision, by pressing

and at the same time for some

seconds.

By default, the detergent quantity

indication is given as a percentage.

100% is the maximum detergent

quantity that you can put in the

compartment of the detergent drawer.

Detergent Quantity Setting

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 111 112

Comments to this Manuals

No comments